BUMPKIN BASS Part 1 - Somerset

So the first big event for us, after much arguing over rig set up here are some ideas to discuss...

the rig consist of the following:
4 ASS MX600
16 [possibly more] HD15s
12 PD1850 X1s

here come the pics

<A id=the ="return fitsIn;"> </A>

<A id=the ="return fitsIn;"> </A>

<A id=the ="return fitsIn;"> </A>

<A id=the ="return fitsIn;"> </A>







" img366.imageshack.us/my.php?image=24428048vq8.jpg "

I personally think RIG 4 is the way to do it

I like #3 

I would try to stack the sub and bass closer together to get a coherant sound.

Beware of doing too large a stack of subs in one pile, especially width-ways. It'll start getting too directional.

I
would go for maybe three stacks, one on each side with the mid tops
then a centre cluster. Or maybe better, do two stacks of 4 HD215's on
their sides rather than ends. with the mid-tops on top, then next to
them do a 2 wide, 3 high stack of X1's.

Depends to a certain extent how high you want to get the mid-tops.

chaudio wrote:   Or maybe better, do two stacks of 4 HD215's on their sides rather than ends. with the mid-tops on top, then next to them do a 2 wide, 3 high stack of X1's.

Depends to a certain extent how high you want to get the mid-tops.

Interresting!

I still wonder how an X1 perform without the the floor underneath:

Rog Mogales wrote: (...)I used two programs to do the X1. I used an Akabak script I wrote that takes many things into account, like that both ports are on the floor so the end correction gives a new lower port tuning.(...)

From this page on speakerplans.com

Rig #3 would be my choice if I was doing such a setup. 

Providing the height is taller than the width of the boxes, you should have no problems controlling where you want the sound to go. 

Best Regards,
Edited by: Elliot Thompson

GIVEorTAKE wrote: Interresting!

I stillwonder how an X1 perform without the the floor underneath:

As far as I know, if it's another cab underneath then it'll behave as if it's on the floor. Just like stacking horns.