Running an amp of a race battery

  • xlogic
  • Topic Author
  • Offline
  • New Member
  • New Member
More
16 years 5 months ago #181 by xlogic
Running an amp of a race battery was created by xlogic
My Nissan 200sx s14a has one of these batteries so that the intercooler pipework can fit through the battery tray

www.apexperformance.co.uk/catalog/produc...841766860c9b601e7653



Recommended for:


Racing cars up to 2.5 Litre using alternator,

Motorcycles, Pit Equipment



Currently used in:

Sports 2000 Duratec, FF1600, FF2000, Formula Renault, Westfield,
Caterham, BRC.



DMS Part No: K770-K513

Voltage: 12V

C/10 Capacity: 16Ah

Terminations: M6 Female

Weight: 6.1Kg

Dimensions (mm) L x W x H: 182 x 77 x 168

Cranking current @ 20°C for 5 secs: 680A

whaddya reckon?

ps
FIRST POST[img]smileys/smiley17.gif[/img]
</span>

Please Log in or Create an account to join the conversation.

  • xlogic
  • Topic Author
  • Offline
  • New Member
  • New Member
More
16 years 5 months ago #182 by xlogic
Replied by xlogic on topic Running an amp of a race battery
amp specs are here
3600 Watt Digital Mono Block Power Amp</font>

* 1x600W RMS at 4 Ohms

* 1x1800W RMS at 2 Ohms

* 1x3600W MAX at 1.3 Ohms

* Mono Block Subwoofer Amplifier

* 1 Ohm Stereo Stable

* MOSFET Power Supply

* PWM (Pulse-Width-Modulated) System

* Double Sided Epoxy PCB Circuit Board

* Gold Plated RCA Inputs

* Custom Terminal Block for Speaker Connections

* Thermal, Overload & Short Protection

* Variable Low pass Filter (50Hz~150Hz,24dB/Octave)

* Variable Subsonic Filter (15Hz~40Hz,24dB/Octave)

* Phase Control 0-180 Degree

* Remote Bass Level Control

* Input Impedance:10K Ohms

* Soft Turn-on/Turn-off

* Red Lighting Illumination

* Side Leg Mounting

* THD: <0.1%.

* S/N Ratio: >90dB

* Input Sensitivity : 200mV ~8V

* Freq. Response : 15Hz ~ 150KHz

* Patent Pending

* Heavy Duty Power Coated Heatsink

* Dimensions : 8.6''(W) x 2.74''(H) x 15''(L)</font></font>

Edited by: xlogic

Please Log in or Create an account to join the conversation.

More
16 years 5 months ago #483 by minaximal
Replied by minaximal on topic Running an amp of a race battery
600watts x 12volts = 50amps

depending on the type of battery maybe only safe for long term lifecycle to run down to 50% =8amphours (i forget the definition of c10 c20 etc)

excluding losses in amp and a perfect battery 50amps / 60 mins = 0.83amps min

sheeit i give up at this point because i am confusing myself and it's late.. but basically you probably only get 10mins out of that battery!

someone else feel free to correct me, im off to bed in the thunder storm now..

still minaximal

Please Log in or Create an account to join the conversation.

  • xlogic
  • Topic Author
  • Offline
  • New Member
  • New Member
More
16 years 5 months ago #700 by xlogic
Replied by xlogic on topic Running an amp of a race battery
as i expected :( ahh well subs just slow you down ;)

Please Log in or Create an account to join the conversation.

More
16 years 2 months ago #4086 by rich_gale
Replied by rich_gale on topic Running an amp of a race battery
a1 faradpower cap will solve all your problems. the only issue you will have is that using the car at high volumes while engine is not running will mean you will run battery very quickly.

Please Log in or Create an account to join the conversation.

Time to create page: 0.227 seconds
Powered by Kunena Forum