quick question

joeysub
Topic Author
Offline
Premium Member

13 years 3 months ago #14880 by joeysub

quick question was created by joeysub

Was just wandering how 2 single 12'' br. bass cab would far up to a single 18br? Looking to make my system smaller and easier to handle!

advice would be appriciated!

Please Log in or Create an account to join the conversation.

tony.a.s.s.
Offline
Moderator

13 years 3 months ago #14882 by tony.a.s.s.

Replied by tony.a.s.s. on topic quick question

Because of the amount of air the 2 12's will push they would be fine. You do need to choose the speakers carefully. You could end up with a more powerful cab than a single 18.

Peace and goodwill to all speaker builders

Please Log in or Create an account to join the conversation.

joeysub
Topic Author
Offline
Premium Member

13 years 3 months ago #14886 by joeysub

Replied by joeysub on topic quick question

Ok thanks tony

The reason why I want to do this is because IV been comming across venues where the function rooms have bin upstairs! One I did had a spiral staircase as the only. Access smiley11

I know the 12'' will be fairly small and that would help! Looking to eventually make about 8 single 12'' br!

What drivers would people recamend?

Many thanks

Please Log in or Create an account to join the conversation.

MAutopsy
Offline
Platinum Member

13 years 3 months ago #14887 by MAutopsy

Replied by MAutopsy on topic quick question

Cubo 12

Please Log in or Create an account to join the conversation.

joeysub
Topic Author
Offline
Premium Member

13 years 3 months ago #14888 by joeysub

Replied by joeysub on topic quick question

Yeh that's a good option , but how do they sound 40-50hz because Mr cubo states that they match or even beat a 18''(from 50hz and up!

Please Log in or Create an account to join the conversation.

Cubo15
Offline
Platinum Member

13 years 3 months ago #14914 by Cubo15

Replied by Cubo15 on topic quick question

Cubo 12's don't have the best output between 40 - 50 Hz in comparison with a single 18" BR or double 12" BR (if those BR are tuned at 30 - 40 Hz).

If you're going to use 12" BR I would recommend the use of doubles (or two singles stacked). You could use Cubo 12 Mod for solid 40 Hz, you can always change to 12" BR.

Best regards

Cubo

Please Log in or Create an account to join the conversation.

joeysub
Topic Author
Offline
Premium Member

13 years 2 months ago #14916 by joeysub

Replied by joeysub on topic quick question

Thank you Mr cubo!

Is there any high power 12'' that will work in the cubo12 if I did go for it?

Maybe
Celestion ftr 12'' 1000w
Beyma 12p1000nd
Beyma 112ndw
Or something else you could suggest along these lines?

And what sort of power would they hit there xmax?

Would be good if I can get the power handling of a 2x12br!

Many thanks

Please Log in or Create an account to join the conversation.

tony.a.s.s.
Offline
Moderator

13 years 2 months ago #14932 by tony.a.s.s.

Replied by tony.a.s.s. on topic quick question

Also have a look at the B and C line, they have a good selection.

Peace and goodwill to all speaker builders

Please Log in or Create an account to join the conversation.

joeysub
Topic Author
Offline
Premium Member

13 years 2 months ago #14936 by joeysub

Replied by joeysub on topic quick question

Thanks tony

B&c are one of the better options!

Just need to know how they sim?
Maybe Mr cubo could sim some high power drivers and see how they might perform please????

Thanks

Please Log in or Create an account to join the conversation.

bee
Offline
Platinum Member

13 years 2 months ago #14937 by bee

Replied by bee on topic quick question

i loaded the b&c 12ndl76 in one made from mdf just to see what it sounded like, and i was very impressed...... it had a very clear sound to it.....

www.elements-audio.com

www.facebook.com/pages/Element-Audio/187065531315529?ref=hl

Please Log in or Create an account to join the conversation.

Time to create page: 0.191 seconds