pro's and cons opinions needed for mixing CD's

  • saul
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
13 years 3 months ago #14617 by saul
ok, i am sticking a 1.5" CD on top of our system next week at a festival, to provide some extra headroom on the HF as i am concerned i may have too much midrange relatively speaking.

the existing CD's are 2" B&C DE85's and the 1.5" is a BMS 4555. all 8ohm

they are the same power rating, and will be playing the same freq range. (1.7khz up)

i am not concerned about the fact they are different drivers, as they will be aimed at different areas of the crowd.

the horns are all the same dispersion, and length.

power:

i either take a link out off one of the midtops, (8core), and therefore one of the amp channels would be running 2x CD's and one will be running one.

the only thing about this method is equalling the levels will be tricky(er). but would probably be alright with some care. not ideal in my books, due to drop in power each driver receives with 4ohm loading. and sensitivities are ever so slightly different.

second option:

run off a different amp entirely (daisy chained), giving it it's own amp channel, therefore more control,could raise the HPF, and would give a more even sound. but messy to string up as would require new cable run.

Please Log in or Create an account to join the conversation.

More
13 years 3 months ago #14621 by tony.a.s.s.
Replied by tony.a.s.s. on topic pro's and cons opinions needed for mixing CD's
Second option is preferable I think. Control is the name of the game.

Peace and goodwill to all speaker builders

Please Log in or Create an account to join the conversation.

More
13 years 3 months ago #14622 by bee
Defo second option, make the cables now and have an easy night

Please Log in or Create an account to join the conversation.

  • saul
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
13 years 3 months ago #14623 by saul
better get the sack barrow out for the CA6 then smiley36

Please Log in or Create an account to join the conversation.

More
Time to create page: 0.242 seconds
Powered by Kunena Forum