Cubo 18

More
13 years 6 months ago #13821 by DJJD
Replied by DJJD on topic Cubo 18
has anybody tried a PD186 in this box?
thanks

Please Log in or Create an account to join the conversation.

More
13 years 6 months ago #13824 by Cubo15
Replied by Cubo15 on topic Cubo 18
Hi,

The PD186 would work best in Cubo 18 Extended.

In some ways it's a similar driver to the 18LW1400, I would expect it to sound best crossed around 80 - 90 Hz, sound low, a bit "warm/round" and average around 102 dB/W/m.

Best regards

Cubo

Please Log in or Create an account to join the conversation.

  • Visitor
  • Visitor
13 years 6 months ago #13831 by
Replied by on topic Cubo 18
what kind of material bump effect did you use to get that nice black textured finish effect in the renders?

Please Log in or Create an account to join the conversation.

More
13 years 5 months ago #13854 by Cubo15
Replied by Cubo15 on topic Cubo 18
@Deny: Can you send an e-mail to questionsaboutcubo[at]gmaildotcom?

Best regards

Cubo

Please Log in or Create an account to join the conversation.

  • Visitor
  • Visitor
13 years 5 months ago #14032 by
Replied by on topic Cubo 18
hi, i finished one cubo 18 (not extended with magnet in horn) today.usualY i do not like 18" speakers and i only built it becuse nobody wanted that eminence sigma 18 pro which was laying around here for years. i was offering it for 80euros allready. i built it with 19mm spahnplatte (the cheapest wood you can get) just to test the design. all i have to say is that im very impresd of this box. it still loads deep enough to be used down to 40hz. unfortunatelly i only had a small car hifi amplifier with me (about 80w rms) but even that was fun. the bass doesnt sound good (still better then most 18" reflex) and should be crossed around 90hz. its biggest advantage is the preassure around 50_60hz. so thanks for sharing your really good plans and greetings from germany.

Please Log in or Create an account to join the conversation.

More
13 years 5 months ago #14071 by av973
Replied by av973 on topic Cubo 18
Hi Cubo , FSP ,

Quite new to FSP. I wanted to share my recently finished Cubo18 (std).

Thanks Cubo and FSP. More power from a Philippine member ...
Attachments:

Please Log in or Create an account to join the conversation.

More
13 years 5 months ago #14089 by bee
Replied by bee on topic Cubo 18

av973 wrote: Hi Cubo , FSP ,

Quite new to FSP. I wanted to share my recently finished Cubo18 (std).

Thanks Cubo and FSP. More power from a Philippine member ...


nice build smiley20

Please Log in or Create an account to join the conversation.

More
13 years 5 months ago #14105 by COZY PILLOW
Replied by COZY PILLOW on topic Cubo 18
very nice build and welcome. smiley32

Please Log in or Create an account to join the conversation.

More
13 years 5 months ago #14121 by flash
Replied by flash on topic Cubo 18
how would the cubo18 perform against RCf ESW1018 when using identical speakers?

Please Log in or Create an account to join the conversation.

More
13 years 5 months ago #14153 by Cubo15
Replied by Cubo15 on topic Cubo 18
The ESW1018 is 288 liter, Cubo 18 is 250 liter. Given that they're about the same volume I expect a similar performance as well. Most noticeable difference will likely be the sound and/or transient response. Only after a few reviews in a direct comparison I can say more about that.

Best regards

Cubo

Please Log in or Create an account to join the conversation.

Time to create page: 1.337 seconds
Powered by Kunena Forum