Cubo 15

Yes it does in Cubo 15 Extended.

Best regards

Cubo15

Hi Cubo,
I was wondering if there`s a maximum number of these cabs I can build? In the long term I`d like 12 or maybe 18 of them, I really like the portabilility of them (back not so good with old age).
Also is there any benefit to different stacking arrangements of multiple cabs?
At the moment mine is loaded with Kappa LF, and I use a 40hz high pass filter, and cross over to my mid tops at about 90hz. I like the sound but I`m wondering if there`s a better driver you know about that will go a few hz lower.
again, thanks for the design
John

Let me think about that for a while (in the mean time build as many as you'd need). However if you build a stack of 6 or more you're hereby ordered to post a pic, unless your build quality is really crappy.

There isn't a driver that will get you any real lower response. However you could V-plate 2 cabinets in order to make Cubo 15 go lower. A stack of 4 x Cubo 15, V-plated, 2 by 2 (two high) will get you response near 30 Hz. It's recommended to use a driver with a higher excursion capability in such case (around 9 mm stated by the manufacturer would generally do it).

Nowaday's quite a few neodymium 15's excist that should be better for your back then the Kappa 15LF while performing better aswell.

Best regards

Cubo15

Hi i would really like the Cubo 15, 15 extendet and 18 plans. they look like just the think i need. could you email them to casperunnerup@hotmail.comps i', a dane so i would prefer the plans with the metrik systemCheers Casper

Here some pics from Tim in the Netherlands who is building 4 at the moment.

Build:

Uploaded with ImageShack.us

Results:

Dolly:

Best regards

Cubo 15

Hi Cubo,
I have just obtained two Omega Pro 15 drivers, one needs reconing, which is being done at the moment, the other is fine. Would they work well with the Cubo 15 cab?

Best
ajcsound

Hi Andrew,

The Omega Pro 15 will work well in both Cubo 15 Standard and Cubo 15 Extended, still Extended is advised. Good luck with reconing, that Cubo 15 may prevent the need to recone ever again

Best regards

Cubo

HI Cubo here are my build pics from Scotland.

img28.imageshack.us/img28/4773/cubo1525.jpg
img28.imageshack.us/img28/5499/cubo1524.jpg
img689.imageshack.us/img689/6444/cubo1519.jpg
img18.imageshack.us/img18/6366/cubo1522.jpg
img18.imageshack.us/img18/4057/cubo1521.jpg
img28.imageshack.us/img28/2250/cubo1520.jpg
img198.imageshack.us/img198/5793/cubo1516.jpg
img685.imageshack.us/img685/1618/cubo1515.jpg
img231.imageshack.us/img231/6886/cubo1514.jpg
img685.imageshack.us/img685/9884/cubo1513.jpg
img40.imageshack.us/img40/4043/cubo1512.jpg
img163.imageshack.us/img163/9332/cubo1511.jpg
img687.imageshack.us/img687/1329/cubo1510.jpg
img143.imageshack.us/img143/4027/cubo159.jpg
img143.imageshack.us/img143/4220/cubo157.jpg
img337.imageshack.us/img337/1563/cubo156.jpg
img683.imageshack.us/img683/2019/cubo151.jpg

Thanks for all your help Cubo.

Regards, smiley32

sorry guys I haven@ posted pics for while and I forgot how to do it. will post them correctly as soon as I can. :oops:

Hello Cozy pillow your pics are great and very usfull. I have a few questions tho,1. Where did you get those handles from i think there great.2. What crosover/plug unit is that on the back of the units it looks interesting.cheers

Hi Nick sorry I could not get back to you earlier. These handles are excellent. they are from Adam Hall. The Cross overs are eminence PXB range but they have stopped making these I believe. The only reason I used these is bacause I will be selling these on to a friend. I don't use passive crossovers normally as they don't work as well as an active crossover. I will have a Behringer Cx2310 for sale probably in early July if you are interested P.M. me?

I have some handles also if you are interested? they are a 2 peice handle with the insert acting as an air tight seal. I had to use a 146mm hole saw to cut the shape needed to make it fit perfectly. Then I routered the shape of the outer handle and rebated the wood by the depth of the handle.

Hope this helps, smiley20