smaller folded 18 cabinet for 2258s

  • tkroeker
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
3 years 8 months ago #24798 by tkroeker
smaller folded 18 cabinet for 2258s was created by tkroeker
I have a pair of JBL 2258H that are the older style with 3" dual coils. Looking for info on a smaller  folded horn that they will do good/low in.

Thanks

Please Log in or Create an account to join the conversation.

More
3 years 8 months ago #24800 by Cubo15
Replied by Cubo15 on topic smaller folded 18 cabinet for 2258s
Do you have the T/S-parameters?

Please Log in or Create an account to join the conversation.

  • tkroeker
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
3 years 8 months ago #24804 by tkroeker
Replied by tkroeker on topic smaller folded 18 cabinet for 2258s
JBL 2258H

FS - 31
QTS - .27
QMS - 4.02
QES - .28
VAS - 407
RE - 5.2
LE - 1.24
SD - .124
MMS - 140

Please Log in or Create an account to join the conversation.

More
3 years 8 months ago #24806 by Cubo15
Replied by Cubo15 on topic smaller folded 18 cabinet for 2258s
It's a good horn driver for horns with a relatively large chamber. However the Mms is fairly low for an 18" and efficiency is very high, so I suspect it's a rather low Xmax driver. I wouldn't aim at very low frequencies and set the high pass at 40 - 50 Hz.

It will work in Cubo 18 Standard/ Extended. For a front loaded horn I would look into horns with a relatively large rear chamber, like the 186 horn, WSX or USB. For the front loaded horns I would use stacks of 2 - 4 cabinets, mono stack if necessary,

Cubo

Please Log in or Create an account to join the conversation.

  • tkroeker
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
3 years 8 months ago #24808 by tkroeker
Replied by tkroeker on topic smaller folded 18 cabinet for 2258s
Awesome, thanks for your time on this!

Please Log in or Create an account to join the conversation.

Time to create page: 0.207 seconds
Powered by Kunena Forum