Turbosound Kick + MT121 Mids

I'm thinking of cab with TMS kick section, but TDA MT121 12" Section





Result to be still non trap

Looks like TMS2 15" section has taller mouth than TSE115 ?

i forget, is the low section on tms2 an 18"?

edit:

no it's a 15 my bad

saul wrote: i forget, is the low section on tms2 an 18"?

edit:

no it's a 15 my bad

Changed mind, (again)...

Was considering using horizontal TSE 115 section below MT121, but seems TMS2 has larger horn mouth, so 15" output be deeper and louder than TSE115/HD15 ?

What exactly is the Turbobass 15" device ?

Any chance someone could sim difference between standard HD15, and HD15 with width extended from 472mm, to 567mm? (With no other mod).

IIRC, recall tony saying such small change shouldn't make much difference.

what about the tsw........

Something like these (Quick Sketch)? smiley4

bee wrote: what about the tsw........

+1

plans are around for these.....

edit: actually no, my thoughts are on the TSE....




lev, i know a good plant hire company, do you want their number?

Nice sketch, Gecko.

Noob question if I may; What's the cone in front of the mid section for? Thanks.

Going to watch how this turns out, should be interesting...

Going to look up the TSW plans as well, anyone have a link to save scouring time?

Ha, llife is funny: I received a mail from Marc today with a very promising new kick bin design, the beast is called MKH-230 and the design is one the easiest (DIY friendly) I have seen in years! I will post it tomorrow, here is a preview and a graph of it against the mighty HD215.I say cut it in half and Bob is... smiley2

[attachment=2:3inkpii1]<!-- ia2 -->sneakP.jpg<!-- ia2 -->[/attachment:3inkpii1]
[attachment=1:3inkpii1]<!-- ia1 -->MKH-230 vs HD215.gif<!-- ia1 -->[/attachment:3inkpii1]
[attachment=0:3inkpii1]<!-- ia0 -->MKH-230.pdf<!-- ia0 -->[/attachment:3inkpii1]

Oh and happy new year to everyone!

guys you're so far now... I just collecting the main concept to start modelling...so let me list...
1. 80 to 150hz
2. loading 15" driver
3. upperside panel fit the mt121's downside panel
4. trap
5. 90° flipped

I'm going to model around b&c 15nw100