MBP-46

Hey,


How would a thomann 18-500 speaker play in this Mbp 46?

Cut a nice big hole in the back of the cab and build a door/hatch that can be replaced and air tight.

Im gonna taste it today

Hi everybody I have all boards already cut to build MBP46 but i dont know how can i do to change the speaker in a long time when it doesnt work ??
im very confused i dont know cause im gona use glue to build them.
thanks !!! :silly: :silly:

Mr Thawach, would 15 inch kapparo LF be suitable for this cab?...how does it compare to cubo 15? thank you

any of u guy ever think about using the 15MBP-46 over scoop as a kick bin??

It is usually to reduce standing waves. That is when the cab dimensions lend to a rather hideous resonance of wavelengths matching the distance between panels. It is also sometimes used when the box size is smaller than ideal for a speaker, as the ploy fill stuff can slow down a wavelength, and sort of simulates a bigger box.

i have a probable stupid question,what is the purpose of insulation in some cabs

Thank you thawach

I will look at different designs then.

hi Mikkel ur drv is not suitable for the 15" cab. the drv is suitable for sealed cab

Hello peeps

I've got a few questions.

Are there any plans for a 15" version of this cab?
If so would the Eminence delta 15LF ( www.bluearan.co.uk/index.php?id=EMIDEL15...wsemode=manufacturer ) work in this cab, would be using them as stand alone bass until i can get some dedicated subs to take over the low freq.

Also im new to all this so im not the most confident of builders so is there anyone here I could ask a few questions on the assembly of the cab/ reading the plans etc, it would be greatly appreciated!

Many thanks

Mikkel

jrock7 wrote: hello, i am interested to make one of these cab (MBP 46) for a 18 inch woofer. However on the plans section is that plan for a 15 or 18 woofer or is it just the same for both drivers?. If there is a separate plan for the 18" woofer can someone post the plan for it. Thanks you.

the plans are difference between 15" n 18" is not the same plan

kreptonite wrote: i would like to build the MBP-46 speaker. What drivers would you suggest. Please help me out, I would like an affordable options which doesn't compromise the quality?

the parameter of drv about fs=40-50 qts=0.3-0.8 vas=140-200 litre will work fine with this cab. please u looking for i can sim for u agian.

hello, i am interested to make one of these cab (MBP 46) for a 18 inch woofer. However on the plans section is that plan for a 15 or 18 woofer or is it just the same for both drivers?. If there is a separate plan for the 18" woofer can someone post the plan for it. Thanks you.

i would like to build the MBP-46 speaker. What drivers would you suggest. Please help me out, I would like an affordable options which doesn't compromise the quality?

t.geessounds wrote: thanks what kick bin would u recomend for these driver???have them already

t.geessounds think that the tapped is suitable for ur drivers more than kick bin.

thanks what kick bin would u recomend for these driver???have them already

t.geessounds isnt good for ur drv. smiley19

would the B&C15 tbx100 work well in the 15 version???

about 18mbp46 think that someone worry that der magnet hits the panel. i adjust the back panel a little. u can see the pic. and i sim the graph respond with der same drvs. enjoy when build gays. smiley2

joeysub wrote: cubo and the mbp-46 are different animals!

the cubo is a sub and sounds good below 100hz and has good efficiency at those frequencies!

where as the mbp-46 is an allround bass cab and plays comfortably upto 150hz, it can play down to the low 40s but has high efficiency in the kick region (70hz-150hz).

hard the compare them as they're most efficient in different regions of the hz scale!

thanks joe helps to explain,yes the sound are very different. cant compare them. many people in thailand built der cubo und mbp46 but more than 50 from 100 built the 15 mbp46 after i posted on thai forum. cubo is best the same, a friend only played 2 boxes in party(because after finish 2). he said very happy with the soft sound. friends i sim der 15mbp46 and compare 2 drvs . please see the graph below. smiley4

cubo and the mbp-46 are different animals!

the cubo is a sub and sounds good below 100hz and has good efficiency at those frequencies!

where as the mbp-46 is an allround bass cab and plays comfortably upto 150hz, it can play down to the low 40s but has high efficiency in the kick region (70hz-150hz).

hard the compare them as they're most efficient in different regions of the hz scale!

i like the look of this box i would wanna try a pair but never hair them before how would it compair to the cubo 15 in the same frequence range?

hi all gays the thread seems no has any update as a long time. today ill update the new pics, the pics show that try to show the boxes and sell them.all guys 2 boxes about 3 dollars is a good price? :idea:

swan wrote: I am very jealous of your rig. Looks very awsome. Well done smiley20

spent money for the carpenter. he never do the furniture , he only build the house. but seem he works well. smiley1