Cubo Kick

  • giveortake
  • Topic Author
  • Offline
  • Administrator
  • Administrator
More
6 years 1 month ago - 6 years 1 month ago #24328 by giveortake
Cubo Kick was created by giveortake
Use this thread to discuss the Cubo Kick design posted  here

What is your philosophy of life or your creed ?
\"Have a good time, ALL THE TIME\"

Wisdom is better than silver and gold !
Last edit: 6 years 1 month ago by giveortake.

Please Log in or Create an account to join the conversation.

More
5 years 8 months ago #24368 by redtag
Replied by redtag on topic Cubo Kick
Ok :p I have 2 Cubo 15 extended loaded with kappa LF-2 and 2 cerwin-vega Prostax PS-12.. I want to upgrade this system with more kick. What should work great? Cubo 12 kick? Or anything else? And what driver? And crossover frequencies?

Please Log in or Create an account to join the conversation.

More
4 years 5 months ago #24629 by Beari
Replied by Beari on topic Cubo Kick
Hi i whant to bulid 6 cubo 15 kicks i already have 6 cyclops loaded with oberton 18xb1600 would i be able to load the cubo with oberton 15xb700 ? Thanks

Please Log in or Create an account to join the conversation.

More
4 years 4 months ago #24644 by skyhighhifi
Replied by skyhighhifi on topic Cubo Kick
Has anyone tried using a Cubo kick down to 40 Hz? Is for a 12v system so looking for something as small and lightweight as possible.

Would I be better off making a Cubo 15?

Please Log in or Create an account to join the conversation.

More
4 years 3 months ago #24646 by Cubo15
Replied by Cubo15 on topic Cubo Kick
@Beari: It's not a typical kick driver, more a typical bass driver although it would work.

@Skyhighhifi: Cubo Kick 15 has 4 ports, for every port that you close you'll lower the tuning approximately 10 Hz but also lower output below 100 Hz. More than 50% of Cubo Kick is aimed at output between 100 and 200 Hz, so if you don't cross that high, a lot of wasted space. Cubo 15 sounds best crossed around 100 Hz but also has much more output below 100 Hz. I've seen both cabinets used for 12V PA but they will have quite distinct sounds and place different demands on the tops used above them.

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago #24771 by audiocronos
Replied by audiocronos on topic Cubo Kick
Hola amigo de cubo Kick, soy nuevo en el foro.
Quiera consultarte algo sobre el cubo Kick 15.
Que efecto negativo podría yo tener si fabrico el cubo Kick 15, a las medidas de: 62cm x 62cm y la profundidad seria de 72cm.
espero pronto tu respuesta, gracias.

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago #24773 by Cubo15
Replied by Cubo15 on topic Cubo Kick
¿Puedes traducir al inglés por favor?

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago #24774 by audiocronos
Replied by audiocronos on topic Cubo Kick
Hola amigo de Kick cube, soy nuevo en el foro.Me gustaría preguntarte algo sobre el cubo Kick 15.¿Qué efecto negativo podría tener si hago el cubo Kick 15, que mide 62cm x 62cm y la profundidad sería de 72cm?Espero tu respuesta pronto, gracias.

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago #24775 by audiocronos
Replied by audiocronos on topic Cubo Kick
Hello Kick cube friend, I am new to the forum.I would like to ask you something about the Kick 15 cube.What negative effect could I have if I make the Kick 15 cube, measuring 62cm x 62cm and the depth would be 72cm.I hope your answer soon, thank you.

Please Log in or Create an account to join the conversation.

More
3 years 10 months ago #24776 by Cubo15
Replied by Cubo15 on topic Cubo Kick
Hi,

It will lower the horn tuning, giving a bit more lower kick (so that's good), the lower limit will still be 80 Hz.  In exchange it will not go as high as usual, I would cross it at maximum 180 Hz.

Please Log in or Create an account to join the conversation.

Time to create page: 0.435 seconds
Powered by Kunena Forum