CUBO10

Does anyone have the plans for CUBO10 ? I want to builtan mid-top and for the low part i want to use 2 x Cubo10 mouth to mouth crossed somewhere at 150-200hz and from there a mid andhigh should do the job. Maybe the cross point will be higher, i don;t know untill i will built one.
Mr. Cubo or somebody can u help please ?

you really need a high bass cab for that job... (kick cab) the cubo 15 and 18 don't play that high, i think this is due to the design.... i now cubo is working on a kick cab at mo, maybe a 10" version of this would be better...... or scale down a usb, hd15.... to suit a 10" driver.... you would need to draw it out to scale basically divide each measurement by 15 or 18 and times by 10.... this will need a few tweaks hear and there but wont be far out...

I know how CUBO12 sounds above 90-100hz because i have 4 bins CUBO12 loaded with RADIAN L12-8481, that;s why i thought at CUBO10. Cross it at about 100-120-150-200hz, depends where it sounds the best, and from there, an 6,5" or 8" mid + driver should do the job.
I've scaled CUBO12 in Autocad and it;s ok. 2 x CUBO12 sticked together and with a midrange and high above it;s verry big and heavy and quite impossibile to put it on a tripod... that;s why i want 2x SMTH on 10", horn loaded, high SPL but small dimensions. Don;t need to get verry low, but still having an F3 at about 80hz aprox, if it;s possibile.

The distinctive Cubo sound above 100 - 120 Hz has more to do with the cabinet then with the driver, thus changing for a 10" might gain 10 - 20 Hz but that's about it. A hybrid (as in Cubo horn topology) kick section is possible but would need a rigurous redesign and lot's of measurements likely.

Safer bet is to wait for one of my 5 horses, or to get an exsisting kick section (for example the one Bee suggests).

Best regards

Cubo
edit - Cubo 10 is a Cubo 12 with a suitable 10".

I want it to be smaller than Cubo12..... So that i can put it on tripot, one Cubo210... with a mid and high above it.

My kicks are at least the size of Cubo 12 but one kick will go with two Cubo's.

Best regards

Cubo

ok, but can i scale Cubo12 ? will it sound rubish ? I need the CUBO210 to be smaller than CUBO212.. I tried to put it on tripot, one CUBO212 butit's verry big and heavy as well..

I doubt a scaled Cubo 10 will be of more use above 150 - 160 Hz than a HD10 would be.

Best regards

Cubo

cubo 10

how do's the cubo12 preforms white the beyma12sw1300? I want to make one.I only do not know a driver to chose
greets